The Teradek RT ACI (Assistant Camera Interface) is a RED DSMC2 module that optimizes camera control for operators and assistants on set. Modules connect seamlessly to the assistant side of DSMC2 cameras, and offer menus that make configuring settings an absolute breeze.
Controls
Constantly adjusting camera settings on a touchscreen can be time-consuming, so the ACI eliminates this challenge by offering tactile push-buttons and jog wheel controls to make navigating RED DSMC2 menus incredibly easy.
Intuitive User Interface
Configure start/stop, shutter speed, color configuration and much more with a familiar, easy-to-use interface. Buttons are fully customizable to your needs.
Lightweight & Durable
ACI’s machined-aluminum chassis is super lightweight, but extremely tough, allowing you to operate in the harshest conditions without concern.
Dark Mode
Adjust the LED’s brightness to be ultra bright for daylight shoots and dimmer for interior/stage shoots and choose between two UI themes optimized for bright or dark environments.
RED Approved DSMC2 Expander module with CTRL (rs232) port required.
RED Expander module with CTRL(RS232) port required. (10-1322) – Sematron Italia official Teradek distributor – Sematron Italia distributore ufficiale Teradek
ACI – 10-1322
Easily access RED camera settings via an intuitive menu system on integrated LCD display
Connects seamlessly to the assistant side of RED DSMC2 cameras.
Redesigns RED’s default camera menu.
Dedicated button and jog wheel controls to navigate through settings.
Fully customizable button layout.
Brand
Teradek
| Weight | 5 kg |
|---|---|
| In the box | 1 x ACUI Top Bracket 1 x ACUI Bottom Bracket 4 x Screw Steel Nylon-Tip Set M4 x 8mm 4 x Screw Socket Head Cap Black Oxide M3 x 4mm 1 x Hex L key 2mm size 3-3/8" length 1 x Hex L-Key, 3 mm Size, 2-9/16" Overall Length 1 x Assistant Camera Interface 1 x USB Male Type A (Full) – USB Male Type B (Micro) -3ft Cable 1 x ACI Control + Power Cable |
| Specs | Technical Specifications: #Protocol Support – Network Protocols : RED Command Protocol (RCP) – Rf Handset Support : N/A – Camera Runstop Support : RED DSMC2 Cameras – Full Control : RED DSMC2 Cameras – Teradek Rt Accessory Support : N/A – App Support : N/A #Wireless – Integrated Radios : N/A – Fhss : N/A – Bluetooth : N/A #Physical Attributes – Dimensions : 0.9", x 3.1" x 5.7", (23.7mm x 79.6mm x 143.9mm) – Weights : 8.8oz (250g) – Construction : Milled Aluminum(Chassis) and regulation-compliant PCB – Mountability : Mount to DSMC2 bracket (included) with M4 screws. – Operating Temperature : -4 to 122°F (-20 to 50°C) #Interfaces – Configuration Interface : 13 menu function buttons and jog wheel controller – Connectors : 1x Power & Control input – Usb Interface Functionality : Upgrade via Micro-USB #Connectors – Power And Camera Input Ctrl : Power: 4-pin circular-locking connector, 7-17V DC CTRL (Camera): 4-pin circular-locking connector, RS-232 for RED control – Motor Inputs : N/A – Auxiliary Inputs : N/A – Microusb : Configuration and Firmware upgrade #Power – Power Input : 4-Pin Circular-locking connector (+11.5 to +17V DC) or DSMC2 Battery Module – Nominal Power Consumption : 2 W |
| UPC | 818264024348 |
